Rockford Fosgate PBR300X4 Punch BRT 300-Watt Ultra Compact 4-Channel Amplifier

Share This

Product Description

Rockford Fosgate Punch 2011 or newer P1 or P2 Series Subwoofer Grille. A cost effective way to protect your subwoofer. Uses existing subwoofer trim ring.

Rockford Fosgate Punch Series Amplification


For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry and they continue to do so today.
It's the reason that they have become the most popular amplifiers in the world. Each of the Punch family amplifiers reproduce
sonic perfection along with impressive power in a compact chassis.




A full-range 4-channel amplifier designed for stereo front/rear systems that requires little space.


300 Watts in an Ultra-Compact Amplifier
CEA-2006

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's
output power ratings are REAL POWER numbers, not inflated marketing ratings.
Discrete Surface Mount

DSM--An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance parts and
large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower
tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating
 temperature. These superior components are used by aerospace, automotive, and cellular manufacturers.
Dynamic Thermal Management

Heat is often inefficiently dissipated across a heatsink causing "hot spots". This impacts important design goals, which are:
Keeping internal components cool.
Maximizing potential of all components.
Reducing distortion for better sound quality.
Increasing efficiency to produce more power.

Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly
 manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.
MEHSA3

MEHSA3 (Maximum Efficiency Heat Sink Application--gen. 3) is a proprietary process that yields up to five times better heat
transfer than traditional FET mounting techniques, using the exact same components. A multi-layer insulated metal substrate
operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device
 across the heatsink. This process combined with our optimized heatsink designs, DSM (Discrete Surface Mount) technology and
MOSFET devices, allows Rockford Fosgate to squeeze more watts per cubic inch from every output device as well as provide
 consistent thermal stability. The 3rd generation creates a dielectric layer between the ceramic topside and the aluminum base
that retains all of the electrical isolation and capacitive coupling of the original MEHSA material increasing it's thermal conductivity.
The higher power handling results in a 20% reduction in thermal impedance.

Discrete surface mount components for ultra-efficient operation and lower operating temperatures.
NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Punch EQ2

In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would
graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars:
A midbass hump between 100-275Hz
A steep roll-off of high frequencies from 2kHz up to 20kHz
Reduced bass response below 50Hz

The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment.
 When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a
 variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.

PBR300X4 Specifications

Number of Channels:	4
Rated Power:	75 Watts x 4 @ 4-Ohms
Total Power:	300 Watts
Dynamic Power:	300 Watts @ 0 degrees RES
Bridgeable:	No
Crossover Controls:	Selectable 80Hz LP/AP/80Hz HP @ 12dB/Octave
Signal Input:	Hi-Level: Variable DC offset sensitivity High-Level: harness Low-Level: 2 Pair RCA
Power Input Connector:	Block Harness
Power Wire Gauge:	10 AWG
Speaker Output Connector:	4-Pin Harness
Speaker Wire Gauge:	Harness 16 AWG
Heat Sink Type:	Extruded aluminum
Cooling:	Convection
Visual Indicators:	Power, Protect, Boost
Circuit Topology Class:	Class BR
Frequency Response:	20Hz - 20kHz +/-1dB
Dimensions (HxWxL):	1.53" x 4.25" x 6.75" (3.90cm x 10.8cm x 17.2cm)

What's in the Box

Rockford Fosgate PBR300X4 Amplifier, Speaker Output Harness, Input Harness, Documentation