breaking

World View

World View

Headlights

Headlights

Extang

Extang

Rockford Fosgate PBR300X2 Punch 300-Watt 2-Channel Boosted Rail Amplifier

Share This






Punch PBR300X2 Car Amplifier



Punch PBR300X2 Car Amplifier


The Punch PBR300X2 uses our patented BRT (Boosted Rail Technology) for an ultra efficient design that does not use a switching power supply to generate its rated power. This allows the chassis design to be much smaller than traditional sized amplifiers. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. It is great for smaller stealth installations, as well as for motorcycles and recreational vehicles.

CEA-2006 Compliant:CEA-2006 Power Rating
100W x 2 @ 4Ω
≤1.0% THD+N
Number of Channels:2
Rated Power
(RMS Continuous Power):
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged
Total Power
(Sum of Rated Power):
300 Watts
Dynamic Power
(PVC/PowerCube®):
114 Watts x 2 @ 4-Ohm
160 Watts x 2 @ 2-Ohm
387 Watts x 1 @ 4-Ohm Bridged
Bridgeable:Yes
Frequency Response:20Hz - 20kHz +/-3dB
Efficiency (average):68% @ 4-Ohm
Total Harmonic Distortion(THD+Noise):4-Ohm: <1.0%
2-Ohm: <1.0%
Crossover Controls:High-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth
All-Pass: Yes
Tone Controls:Optional Remote Punch EQ
Input Sensitivity:150 mV - 11 V
Signal Input:High/Low Level Input: 4-Pin harness
Hi-Level Sensitivity: Variable DC offset sensitivity
Signal Output:-
Power Input Connector:Detachable Compression Terminal
Power Wire Gauge:10 AWG
Speaker Output Connector:4-Pin Harness
Speaker Wire Gauge:16 AWG
Heat Sink Type:Extruded Aluminum
Cooling:Convection
Remote Controls:Optional PEQ provides 0dB to +18dB @ 45Hz
Visual Indicators:Power/Protect, BRT (Boost)
Circuit Topology Class:Class-BR
Operating Voltage:9 - 16 VDC
Recommended Fuse
(not included):
50 A
Max. Current Draw (13.8V Sinewave):45 A
Average Current Draw (13.8V Music):23 A
Suggested Alternator:75 A
Shipping Weight:2.8 Lbs. (1.27 Kg.)
Dimensions (HxWxL):1.53 x 4.25 x 6.75 (in.)
3.90 x 10.8 x 17.2 (cm)
Dimensional Diagram:

About PRETEND PLAY

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.
«
Next
Newer Post
»
Previous
Older Post

No comments:

Leave a Reply